Apple Blog, Apple How to?, Apple Macbook Blog

How to replace MacBook Air screen 2020?

how to replace macbook air screen 2020

 

- Advertisement -

Learn how to replace the screen on a 2020 MacBook Air with a step-by-step guide to help you efficiently and safely navigate through the screen replacement process.

Revamp your MacBook Air 2020 screen like a pro!

The process of replacing the screen on a 2020 MacBook Air can be complex and delicate. It’s recommended to have the replacement done by a professional technician or an authorized service provider to ensure the job is performed accurately and safely. The screen replacement process typically involves these steps:

  1. Prepare Workspace and Tools:
    • Set up a clean and organized workspace with ample lighting.
    • Gather necessary tools such as a pentalobe screwdriver, suction cup, tweezers, and a spudger tool.
  2. Power Off and Disconnect:
    • Power off the MacBook Air and unplug any connected cables or peripherals.
    • Close the MacBook and place it on a soft, lint-free surface with the screen facing downwards.
  3. Remove the Bottom Case:
    • Unscrew the pentalobe screws securing the bottom case and carefully remove it.
  4. Disconnect Battery and Components:
    • Locate and disconnect the battery connector to prevent any electrical mishaps.
    • Disconnect any other components connected to the logic board.
  5. Remove the Screen Assembly:
    • Use a suction cup to lift the display assembly slightly.
    • Use a spudger tool to carefully detach the adhesive securing the display assembly to the MacBook’s frame.
    • Slowly lift and tilt the screen away from the MacBook’s body, being cautious with the delicate display cables.
  6. Replace the Screen:
    • Install the new screen assembly by aligning it with the MacBook’s body.
    • Carefully reconnect the display cables and secure them properly.
    • Gently press the screen into place to adhere to the adhesive.
  7. Reassemble and Test:
    • Reconnect the battery and other components that were disconnected.
    • Reattach the bottom case and secure it with the pentalobe screws.
    • Power on the MacBook Air and test the newly replaced screen for functionality.

Given the intricacies and risks involved in screen replacement, seeking professional assistance from certified technicians or authorized service centers is highly advisable to ensure the screen is replaced correctly and without causing any further damage to the MacBook Air. Attempting screen replacement without proper expertise may result in irreparable damage to the device.

How to safely remove and lift the old screen assembly from the MacBook Air body?

When detaching the old screen assembly from a MacBook Air during a repair or replacement, it’s crucial to handle the process delicately and methodically. Start by ensuring the MacBook Air is powered off and disconnected from any power sources to avoid electrical mishaps. Additionally, if the screen repairs are due to liquid damage or accidental damage, take extra care during the removal process to prevent causing additional damages to internal components or the replacement screen.

To safely detach the old screen assembly, begin by gently lifting the display assembly slightly using a suction cup or tools designed for screen removal. Apply moderate and even pressure to lift the screen, taking care not to exert excessive force that might damage the delicate connectors or the MacBook’s body. Use a spudger tool or other suitable prying tool to carefully detach the adhesive securing the screen assembly to the MacBook Air’s frame. Slowly and steadily work around the edges of the display, gradually loosening the adhesive while ensuring the delicate connectors, especially the display cables, aren’t subjected to undue stress or strain. Proceed with caution to prevent any screen damage or further harm to the MacBook Air during this detachment process.

Conclusion

In conclusion, replacing a MacBook Air screen in 2020 requires specialized tools and caution. To start, power off the device and disconnect it from any power source. Use a suction cup to lift the display assembly slightly, then use a spudger tool to carefully detach the adhesive securing the display assembly to the MacBook’s frame. Carefully lift and tilt the screen away from the body of the laptop, taking care not to damage any delicate display cables. Next, install the new display assembly by aligning it with the MacBook’s body. Reconnect all necessary components and secure them properly, then gently press the screen into place to adhere it using adhesive. Finally, reattach the bottom case and test functionality by powering on the device.

 

- Advertisement -

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *