Can you remove stand from iMac

Can you remove stand from iMac


Removing the stand from an iMac can be a necessary step for various purposes, such as mounting the computer on a VESA-compatible arm or wall mount. While it might seem like a daunting task, it can be accomplished with some careful steps. Read on to learn how to safely remove the stand from your iMac.

Discover the secret to setting your iMac free: say goodbye to the stand!

Certainly, here’s a detailed guide on how to remove the stand from an iMac:

To remove the stand from your iMac, you’ll need to follow these steps:

  1. Gather Necessary Tools:
    • Before starting, ensure you have the right tools, including a soft cloth or microfiber towel to protect the iMac’s screen.
  2. Turn Off and Disconnect:
    • Shut down your iMac and disconnect all cables, including the power cord.
  3. Lay Down a Protective Surface:
    • Create a cozy cushion for your iMac’s screen by laying down a soft cloth or microfiber towel on a flat surface.
  4. Position the iMac Face Down:

    • Gently lay the iMac face down on the cloth, making sure the screen is supported evenly.
  5. Locate the Stand Release Button:
    • On the back of the iMac near the stand, you’ll find a small button or lever. This is the stand release button.
  6. Press the Stand Release Button:
    • Use your finger or a non-metallic tool to press and hold the stand release button.
  7. Slide the Stand Out:
    • While holding the stand release button, gently slide the stand out of its slot. It should come off smoothly.
  8. Secure the Stand:
    • Store the stand in a safe place, as it may be needed again in the future.

For VESA Mounting (applicable to 24-inch iMac):

  1. Check for VESA Compatibility:
    • If you plan to mount your iMac, ensure it’s a VESA-compatible model. The 24-inch iMac is designed to support VESA mounting.
  2. Line Up the Mount Plate:
    • Position the VESA mount plate over the screw holes on the back of your iMac.
  3. Secure the Mount Plate:
    • Use the included screws to fasten the mount plate to the iMac. Be careful not to overtighten.
  4. Attach to VESA Mount:
    • Once the mount plate is securely attached, you can now affix the iMac to your VESA-compatible arm or wall mount.

Remember, if you’re unsure about any step, it’s a good idea to consult online communities or forums where fellow users may have shared their experiences with similar processes. Removing the stand is a common procedure, especially for those opting for VESA mounting or other specialized setups, and there are often step-by-step guides available. Always proceed with caution and consider seeking professional assistance if you’re uncertain about any part of the process.

What Precautions Should Be Taken to Protect the iMac’s Screen?

Protecting the iMac’s screen during the stand removal process is crucial to prevent any accidental damage. To ensure the safety of the screen, it’s advisable to use a soft cloth or microfiber towel as a protective layer. Lay the iMac face down on a flat, stable surface covered with the cloth. This will create a cushioning barrier between the screen and the surface, guarding against scratches, smudges, or any potential pressure points that could affect the display.

Additionally, it’s important to handle the iMac with care and avoid applying excessive force on the screen. When pressing the stand release button and sliding out the stand, do so gently and with controlled movements. This minimizes any risk of inadvertently putting strain on the screen. Taking these precautions helps ensure that the iMac’s screen remains in pristine condition throughout the stand removal process.


In conclusion, yes, you can remove the stand from an iMac by pressing and holding the stand release button while gently sliding the stand out of its slot. Additionally, if you plan to mount your iMac with a VESA-compatible arm or wall mount, ensure it is a compatible model and then attach the VESA mount plate before affixing it to the mount. When removing or handling the iMac’s stand, use caution and be sure to lay the device on a soft cloth or microfiber towel for protection.